SEARCH NOW FOR ALL YOUR CONE DRIVE SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Motors/GearBox/Clutch / Gear Box
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
CONE DRIVE
MH040XBA068-3
DISCONTINUED BY MANUFACTURER, GEARBOX, 30:1 RATIO, 5.88 TH RATING, 3300 RPM, S.F 1, AGMA 7S
✓ IN STOCK!
£600.60
Price with VAT:
£720.72
CONE DRIVE
RG35160
RIGHT ANGLE GEARHEAD, OUTPUT TORQUE CAPACITY 8,500 LB.IN, CENTER DISTANCE 1.5-3.5 INCHES, INPUT POWER RATINGS 27 HP, 4,000 RPM, GEAR RATIOS 5:1-60:1
✓ IN STOCK!
£522.10
Price with VAT:
£626.52
CONE DRIVE
RG25115SSAE03DMMDKZ
DISCONTINUED BY MANUFACTURER, GEARHEAD, FOR SERVO MOTOR, RIGHT ANGLE, RG SERIES, 15:1 RATIO, 2001-3600 RPM INPUT, 1.5 IN HOLLOW BORE, STANDARD BACKLASH UNIT, INCH HOLLOW BORE OUTPUT SHAFT, A ...
✓ IN STOCK!
£308.03
Price with VAT:
£369.64
CONE DRIVE
W03805.0SKHS03BGKCJ
DISCONTINUED BY MANUFACTURER, GEAR BOX, 5:1 RATIO, HOLLOW SHAFT. 25 MM OUTPUT BORE
✓ IN STOCK!
£290.92
Price with VAT:
£349.10
CONE DRIVE
S11025.SWSAA06DJMDTW
DISCONTINUED BY MANUFACTURER, GEAR BOX, NOMINAL BACKLASH: 12 ARC.MIN, RATIO SELECTED - 25:1, INPUT SPEED:1000 RPM, CYCLIC OPERATION INPUT TORQUE: 298 LB-IN, MECHANICAL INPUT TORQUE: 248 LB-I ...
✓ IN STOCK!
£966.83
Price with VAT:
£1,160.19
CONE DRIVE
MHV20-X8A
GEARBOX, 15:1 RATIO, 1750RPM INPUT, 1.0SF,
✓ IN STOCK!
£228.69
Price with VAT:
£274.43
CONE DRIVE
W038020.SKHS03DHLDK-
GEAR BOX, W SERIES, 38.1 MM CD, STANDARD BACKLASH, GEARSET 20:1, 25 MM BORE HOLLOW GEARSHAFT, ADAPTOR (38WS-M20), PLATE (MP1DHLD), KEYED COUPLING 19 MM MOTOR SHAFT, OPTION 3M HAND OF ASSEMBL ...
✓ IN STOCK!
£964.10
Price with VAT:
£1,156.92
CONE DRIVE
MSHU20A626-1
DISCONTINUED BY MANUFACTURER, GEAR BOX, 5:1 RATIO, 1500RPM INPUT, 1 SF, 3.48 TH
✓ IN STOCK!
£329.33
Price with VAT:
£395.20
CONE DRIVE
RG251015SSAE03DMMDKZ
DISCONTINUED BY MANUFACTURER, GEARHEAD, FOR SERVO MOTOR, RIGHT ANGLE, 15:1 RATIO, 3600 MAX INPUT RPM, INCH HOLLOW BORE OUTPUT SHAFT, 2001-3600 INPUT RPM SPEED, STANDARD BACKLASH UNIT, ASSY P ...
✓ IN STOCK!
£290.92
Price with VAT:
£349.10
CONE DRIVE
W0380030SSAS03BCKCJZ
DISCONTINUED BY MANUFACTURER, SERVO GEARBOX, PRECISION, RIGHT ANGLE, BLACK FINISH, MOTOR ADAPTOR AND COUPLING, 1 INCH HOLLOW BORE, 038 UNIT SIZE, SERVO TYPE MOTOR
✓ IN STOCK!
£256.69
Price with VAT:
£308.03
CONE DRIVE
W0380030SSSS03BCKCJZ
DISCONTINUED BY MANUFACTURER, SERVO GEARBOX, PRECISION, RIGHT ANGLE, BLACK FINISH, MOTOR ADAPTOR AND COUPLING, 1 INCH HOLLOW BORE, 038 UNIT SIZE, SERVO TYPE MOTOR
✓ IN STOCK!
£256.69
Price with VAT:
£308.03
CONE DRIVE
W0380030SSSS03BGKCJZ
DISCONTINUED BY MANUFACTURER, SERVO GEARBOX, PRECISION, RIGHT ANGLE, BLACK FINISH, MOTOR ADAPTOR AND COUPLING, 038 UNIT SIZE, SERVO TYPE MOTOR
✓ IN STOCK!
£251.79
Price with VAT:
£302.15
CONE DRIVE
B081020-WANQA
DISCONTINUED BY MANUFACTURER, GEAR BOX, RIGHT ANGLE, 20:1, 56C MOTOR FRAME
✓ IN STOCK!
£231.02
Price with VAT:
£277.22
CONE DRIVE
S11025.SWSAA06CHLCQW
DISCONTINUED BY MANUFACTURER, ACCUDRIVE GEAR BOX, S SERIES, INPUT SPEED MAX.[RPM]: 1000, UNIT SIZE: 11, NOMINAL RATIO: 25: 1, WITH SERVO REDUCER
✓ IN STOCK!
£966.83
Price with VAT:
£1,160.19
CONE DRIVE
B06-57630
DISCONTINUED BY MANUFACTURER, GEAR BOX, 1750RPM, 20:1 RATIO
✓ IN STOCK!
£326.29
Price with VAT:
£391.55
CONE DRIVE
B0610-A135
DISCONTINUED BY MANUFACTURER, GEARBOX, RIGHT ANGLED, SERIES B, 6 UNIT SIZE, 1 REDUCTION, UNIT TO ALLOW FITTING OF NEMA MOTOR
✓ IN STOCK!
£141.18
Price with VAT:
£169.42
CONE DRIVE
S0605.0SWSND02DHMDP
DISCONTINUED BY MANUFACTURER, SERVO GEARSET, HOLLOW GEARSHAFT, SGL EXT SOLID
✓ IN STOCK!
£762.10
Price with VAT:
£914.52
CONE DRIVE
S06060.SWSPC03DHLDK
SERVO GEARSET, HOLLOW, 60:1, DBL EXT SOLID, ADAPTER / PLATE
✓ IN STOCK!
£633.37
Price with VAT:
£760.05
CONE DRIVE
MH015A164-2
DISCONTINUED BY MANUFACTURER, GEAR REDUCER, 1750 INPUT RPM, 10:1 RATIO, 1.4 MECH RATING
✓ IN STOCK!
£770.08
Price with VAT:
£924.10
CONE DRIVE
W06405.0LKAS06GLQEPW
DISCONTINUED BY MANUFACTURER, GEARBOX, W SERIES, LOW BACKLASH, RATIO: 5:1, MOTOR SHAFT DIAMETER[MM]: 24
✓ IN STOCK!
£146.10
Price with VAT:
£175.32
CONE DRIVE
B02105.0WAAU1
DISCONTINUED BY MANUFACTURER, GEAR BOX, SIZE 02, 5:1 RATIO, 56C FRAME
✓ IN STOCK!
£324.60
Price with VAT:
£389.52
CONE DRIVE
M06211-BRN
DISCONTINUED BY MANUFACTURER, GEARBOX, 11:1, 154 RPM, 13.3 POWER
✓ IN STOCK!
£256.69
Price with VAT:
£308.03
CONE DRIVE
030DB-6-C01HLE
DISCONTINUED BY MANUFACTURER, CONE DRIVE GEARBOX, 3000 RPM, 10:1
✓ IN STOCK!
£641.73
Price with VAT:
£770.08
CONE DRIVE
MSHV-40A020-Y8A-0701
DISCONTINUED BY MANUFACTURER, GEARBOX, 4.32 HP, 1750 RPM, 40:1 RATIO
✓ IN STOCK!
£641.73
Price with VAT:
£770.08
CONE DRIVE
MHU35-W3
DISCONTINUED BY MANUFACTURER, REDUCER, 10:1 RATIO, 8.94 RATING, 1500 INPUT RPM
✓ IN STOCK!
£457.41
Price with VAT:
£548.89
CONE DRIVE
RG201007S-AF03
DISCONTINUED BY MANUFACTURER, GEAR BOX, 7:1 RATIO, IP 65
✓ IN STOCK!
£392.06
Price with VAT:
£470.47
CONE DRIVE
W0510025SKSST6DHLDKZ
GEAR BOX, W SERIES, 50.8 MM CD, STANDARD BACKLASH, GEARSET 25:1, GEAR SHIFT (51WSMA003-F61), 26 MM BORE, ADAPTOR (51WS-M20), PLATE (MP1DHLD), KEYED COUPLING 19 MM MOTOR SHAFT, OPTION T6 HAND ...
✓ IN STOCK!
£2,606.48
Price with VAT:
£3,127.78
CONE DRIVE
F0391AWNT02-
DISCONTINUED BY MANUFACTURER, SPEED REDUCER GEAR BOX, 60:1 GEAR RATIO
✓ IN STOCK!
£653.44
Price with VAT:
£784.12
CONE DRIVE
W064015.SKHS06GLQERZ
DISCONTINUED BY MANUFACTURER, GEAR BOX, W SERIES, SIZE 064, 15:1 RATIO, STANDARD BACKLASH, 35 MM HOLLOW OUTPUT, 130 MM PILOT DIA, SERVO MOTORSTANDARD BACKLASH
✓ IN STOCK!
£1,270.57
Price with VAT:
£1,524.68
CONE DRIVE
S09060.SWSAC03DGKCJ
SERVO GEARSET, S09 SERIES, 60:1 RATIO, HOLLOW GEARSHAFT, ADAPTER WITH PLATE
✓ IN STOCK!
£1,589.52
Price with VAT:
£1,907.42
CONE DRIVE
MHO15A163-1
DISCONTINUED BY MANUFACTURER, GEAR REDUCER, 20:1 RATIO, 0.76 MECH, 1750 INPUT
✓ IN STOCK!
£470.48
Price with VAT:
£564.57
CONE DRIVE
R025115-SKPE03DJMDPZ
DISCONTINUED BY MANUFACTURER, CONE DRIVE GEARBOX, RATIO 15:1
✓ IN STOCK!
£288.82
Price with VAT:
£346.58
CONE DRIVE
L070115.BLCDBJ
GEARBOX, L SERIES, DOUBLE REDUCTION, SIZE 070, REVISION 1, 15:1 RATIO
✓ IN STOCK!
£484.03
Price with VAT:
£580.83
CONE DRIVE
MH015A063-2
DISCONTINUED BY MANUFACTURER, GEAR REDUCER, 10:1 RATIO, 1750INPUT RPM
✓ IN STOCK!
£513.38
Price with VAT:
£616.06
CONE DRIVE
W0380020SKHS06DHLDKZ
DISCONTINUED BY MANUFACTURER, SERVO GEARBOX, 20:1 RATIO, HOLLOW BORE, RIGHT ANGLE,
✓ IN STOCK!
£326.72
Price with VAT:
£392.06
CONE DRIVE
RG251005LSNF01HJNDR
DISCONTINUED BY MANUFACTURER, GEARHEAD, FOR SERVO MOTOR, RIGHT ANGLE, 15:1 RATIO, 3600 MAX INPUT RPM, INCH HOLLOW BORE OUTPUT SHAFT, 2001-3600 INPUT RPM SPEED, STANDARD BACKLASH UNIT, ASSY P ...
✓ IN STOCK!
£446.95
Price with VAT:
£536.34
CONE DRIVE
B0311-58030
DISCONTINUED BY MANUFACTURER, GEAR REDUCER, RATIO 7.5:1, LUBE: AGMA 7S
✓ IN STOCK!
£261.37
Price with VAT:
£313.65
CONE DRIVE
B101120.WANQB
GEAR BOX / WORM, RIGHT ANGLE, RATIO / 20:1
✓ IN STOCK!
£856.96
Price with VAT:
£1,028.35
CONE DRIVE
W05105.0SKSST3BDEBD-
GEAR BOX, W SERIES, 50.8 MM CD, STANDARD BACKLASH, GEARSET 5:1, GEARSHAFT W51 END MOUNT, ADAPTOR (51WS-M20), PLATE (MP1BDEB), KEYED CPLG 11 MM MOTOR SHAFT, OPTION T3 HAND OF ASSEMBLY, END MO ...
✓ IN STOCK!
£1,893.15
Price with VAT:
£2,271.78
CONE DRIVE
W0640015SKHS06DHLDKZ
GEAR BOX, W SERIES, 63.5 MM CD, STANDARD BACKLASH, GEARSET 15:1, 35 MM BORE HOLLOW GEARSHAFT, ADAPTER W/ PLATE MP2D-AN-HLD, KEYED COUPLING 19 MM MOTOR SHAFT, OPTION 6M HAND OF ASSEMBLY
✓ IN STOCK!
£2,545.98
Price with VAT:
£3,055.18
CONE DRIVE
RG151030SSAE03BGKCJ
GEARBOX 30:1 7/8INCH HOLLOW BORE SIZE15
£399.62
Price with VAT:
£479.55
CONE DRIVE
MSHO20-1
GEAR BOX 1750RPM 15:1 RATIO 1-1/4INCH BORE 145TC
£712.60
Price with VAT:
£855.11
CONE DRIVE
B051015.WANTA
DISCONTINUED BY MANUFACTURER, GEAR BOX, 1750RPM, 15:1RATIO, SINGLE REDUCTION UNIT
£439.41
Price with VAT:
£527.29
